Step 4 Hold the system battery with the side marked with text facing upwards, insert the left end of
the system battery into the slot, and gently press down the system battery until it is properly
installed in the slot. See Figure 7-56.
Figure 7-56 Installing the system battery
Step 5 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 6 Install the 5288 V3. For details, see 3.4 Installing the Server.
Step 7 Connect all internal cables such as power and network cables. For details, see 3.5 Connecting
External Cables.
Step 8 Power on the 5288 V3. For details, see 4.1 Powering On the Server.
----End
7.29 Removing the RAID Controller Card from the
Mainboard
Remove a RAID controller card before replacing it with a new one. The appearance and
position of a RAID controller card may vary according to models, but the removal method is
the same.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 170
To Next Page
Loading...
