Step 4 Remove all external cables such as power and network cables.
Step 5 Remove the 5288 V3 and put it on an ESD desktop. For details, see 3.6 Removing the
Server.
Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Pull up the right end of the system battery and remove it from the slot. See Figure 7-55.
Figure 7-55 Removing the system battery
Step 8 Place the removed system battery in an ESD bag.
----End
7.28 Installing the System Battery
Install a system battery to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the system battery to be replaced. For details, see 7.27 Removing the System
Battery.
Step 3 Take the spare system battery out of its ESD bag.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 169
To Next Page
Loading...
