Step 6 Remove the chassis cover. For details, see 7.11 Removing the Chassis Cover.
Step 7 Remove the internal USB flash drive from the connector on the mainboard. See Figure 7-53.
Figure 7-53 Removing the internal USB flash drive
Step 8 Place the removed USB flash drive in an ESD bag.
----End
7.26 Installing the Internal USB Flash Drive
Install a USB flash drive to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the USB flash drive to be replaced. For details, see 7.25 Removing the Internal
USB Flash Drive.
Step 3 Take the spare USB flash drive out of its ESD bag.
Step 4 Insert the USB flash drive into the upper USB port. See Figure 7-54.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 167
To Next Page
Loading...
