Figure 7-30 Removing a fan module
Step 9 Place the removed fan module in an ESD bag.
----End
7.16 Installing a Fan Module
Install a fan module to replace the original one or after replacing other components (such as
the mainboard and DVD drive).
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the fan module to be replaced. For details, see 7.15 Removing a Fan Module.
Step 3 Take the spare fan module out of its ESD bag.
Step 4 Insert the fan module along the guide rails into the slot. Check that the fan cable connector is
securely inserted into the mainboard connector. See Figure 7-31.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 145
To Next Page
Loading...
