NOTE
The fan modules are hot-swappable. You can skip steps Step 6 to Step 8 when you can open the chassis
cover without removing the server. The scenarios include but are not limited to: (1) the server is installed
on holding or adjustable guide rails and (2) the server is not installed in a cabinet.
Figure 7-31 Installing a fan module
Step 5 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 6 Install the 5288 V3. For details, see 3.4 Installing the Server.
Step 7 Connect all internal cables such as power and network cables. For details, see 3.5 Connecting
External Cables.
Step 8 Power on the 5288 V3. For details, see 4.1 Powering On the Server.
----End
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 146
To Next Page
Loading...
