7.56 Installing the PSU Backplane
Install a PSU backplane to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the PSU backplane to be replaced. For details, see 7.55 Removing the PSU
Backplane.
Step 3 Take the spare PSU backplane out of its ESD bag.
Step 4 Place the PSU backplane in the planned position, and push it downward until it cannot move.
See Figure 7-118.
Figure 7-118 Installing the PSU backplane
Step 5 Connect cables to the PSU backplane. For details, see 2.7 Internal Cabling.
Step 6 Install PSUs. For details, see 7.10 Installing a PSU.
Step 7 Install the air duct. For details, see 7.14 Installing the Air Duct.
Step 8 Install the 5288 V3. For details, see 3.4 Installing the Server.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 234
To Next Page
Loading...
