Figure 7-24 Installing the chassis cover
Step 3 Tighten the latch using a flat-head screwdriver to secure the handle. See step (3) in Figure
7-24.
Step 4 Install the 5288 V3. For details, see 3.4 Installing the Server.
Step 5 Connect all internal cables such as power and network cables. For details, see 3.5 Connecting
External Cables.
Step 6 Power on the 5288 V3. For details, see 4.1 Powering On the Server.
----End
7.13 Removing the Air Duct
Remove the air duct before replacing it with a new one or replacing a CPU, DIMM, or
supercapacitor.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 140
To Next Page
Loading...
