7 Replacing Parts
About This Chapter
This topic describes the replaceable parts of the 5288 V3 and how to replace them.
l Ensure that the obtained spare parts are compatible and function properly before any
replacement. For details about parts compatibility, see Huawei Server Compatibility
Checker.
l After parts replacement, the software, firmware, and CPLDs on the new components
must be upgraded to the version used in the customer environment or to the latest
version. It is recommended that the version be upgraded to the version used in the
customer environment. For details, see the HUAWEI Rack Server Upgrade Guide
(iBMC) and HUAWEI Server Firmware Upgrade Guide.
l After the components are replaced, restore their configurations (including BMC, BIOS,
and RAID configurations) on the customer live network.
7.1 Replaceable Parts
7.2 Tool Preparations
7.3 (Optional) Removing the Front Bezel
7.4 (Optional) Installing the Front Bezel
7.5 Removing a Hard Disk
7.6 Installing a Hard Disk
7.7 Removing an NVMe PCIe SSD
7.8 Installing an NVMe PCIe SSD
7.9 Removing a PSU
7.10 Installing a PSU
7.11 Removing the Chassis Cover
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 118
To Next Page
Loading...
