Figure 7-103 Installing a mezzanine SD card
2. Tighten the two screws. See step (2) in Figure 7-103.
Step 8 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 9 Install the 5288 V3. For details, see 3.4 Installing the Server.
Step 10 Connect all internal cables such as power and network cables. For details, see 3.5 Connecting
External Cables.
Step 11 Power on the 5288 V3. For details, see 4.1 Powering On the Server.
----End
7.49 Removing an SD Card Board
Remove a SD card board before replacing it with a new one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the cabinet number and chassis number of the server, and label its panel to prevent
misoperations.
Step 3 Power off the RH1288 V3. For details, see 4.2 Powering Off the Server.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 219
To Next Page
Loading...
