Figure 7-58 Removing the RAID controller card
Step 12 Lift the RAID controller card slowly out of the server. See step (2) in Figure 7-58.
Step 13 Place the removed RAID controller card in an ESD bag.
----End
7.30 Installing the RAID Controller Card on the
Mainboard
Install a RAID controller card to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the RAID controller card to be replaced. For details, see 7.29 Removing the RAID
Controller Card from the Mainboard.
Step 3 Take the spare RAID controller card out of its ESD bag.
Step 4 (Optional) Remove the rubber plugs from the ports on the RAID controller card if any. See
Figure 7-59.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 172
To Next Page
Loading...
