Figure 7-59 Ports with rubber plugs
Step 5 Align the connector on the RAID controller card with the port on the mainboard, and insert
the RAID controller card slowly into the mainboard. See step (1) in Figure 7-60.
Figure 7-60 Installing a RAID controller card
Step 6 Tighten the screws on the RAID controller card. See step (2) in Figure 7-60.
Step 7 Connect cables to the RAID controller card. For details, see 2.7 Internal Cabling.
Step 8 Install full-height full-length riser cards if they are required. For details, see 7.20 Installing a
Riser Card.
Step 9 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 10 Install the 5288 V3. For details, see 3.4 Installing the Server.
Step 11 Connect all internal cables such as power and network cables. For details, see 3.5 Connecting
External Cables.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 173
To Next Page
Loading...
