7.54 Installing the Rear Hard Disk Backplane
Install a rear hard disk backplane to replace the original one.
Installing a Rear Hard Disk Backplane for 12 Disks
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the rear hard disk backplane to be replaced. For details, see 7.53 Removing the Rear
Hard Disk Backplane.
Step 3 Take the spare rear hard disk backplane out of its ESD bag.
Step 4 Hook the rear hard disk backplane, and move it downward until its latch automatically locks.
See Figure 7-114.
Figure 7-114 Installing a rear hard disk backplane for 12 disks
Step 5 Connect cables to the rear hard disk backplane. For details, see 2.7 Internal Cabling.
Step 6 Install the mainboard frame and connect all cables to the mainboard. For details, see 2.7
Internal Cabling.
Step 7 Install all hard disks in the rear hard disk backplane.
Step 8 Connect all internal cables. For details, see 2.7 Internal Cabling.
Step 9 Install the fan modules. For details, see 7.16 Installing a Fan Module.
Step 10 Install the air duct. For details, see 7.14 Installing the Air Duct.
Step 11 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 230
To Next Page
Loading...
