Step 9 Connect all internal cables such as power and network cables. For details, see 3.5 Connecting
External Cables.
Step 10 Power on the 5288 V3. For details, see 4.1 Powering On the Server.
----End
7.57 Removing a Front Mounting Ear Plate
Remove a front mounting ear plate before replacing it with a new one.
The server has two front mounting ears. One is on the left of its front panel, and the other is
on the right. This topic uses the front mounting ear on the left as an example.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Determine the rack number and chassis number of the server to be removed, and label its
panel to prevent misoperations.
Step 3 Power off the 5288 V3. For details, see 4.2 Powering Off the Server.
Step 4 Determine the position of the mounting ear on the 5288 V3. See Figure 7-119.
Figure 7-119 Position of the mounting ear
Step 5 Loosen the screws that secure the front mounting ear to the 5288 V3. See step (1) in Figure
7-120.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 235
To Next Page
Loading...
