Figure 7-106 Removing the hard disk backplane
Step 13 Place the removed hard disk backplane in an ESD bag.
----End
7.52 Installing the Front Hard Disk Backplane
Install a hard disk backplane to replace the original one.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the front hard disk backplane to be replaced. For details, see 7.51 Removing the
Front Hard Disk Backplane.
Step 3 Take the spare front hard disk backplane out of its ESD bag.
Step 4 Align the notches on the hard disk backplane with the hooks (the mechanical part marked
with a red box in Figure 7-107), move the hard disk backplane horizontally to the head of the
chassis until the hard disk backplane cannot move forward, and move the hard disk backplane
downwards until the latches are locked. See (1) in Figure 7-107.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 223
To Next Page
Loading...
