M.2 SATA SSD cards. An M.2 SATA SSD card using the external SATA1 port is used as an
example in this topic.
Procedure
Step 1 Wear an ESD wrist strap. For details, see 1 Safety Instructions.
Step 2 Remove the M.2 SATA SSD card to be replaced. For details, see 7.59 Removing an M.2
SATA SSD Card.
Step 3 Take the spare M.2 SATA SSD card out of its ESD bag.
Step 4 Slot the M.2 SATA SSD card into the M.2 SSD riser at a 20° to 30° angle and position it
horizontally. See step (1) in Figure 7-125.
Figure 7-125 Installing an M.2 SATA SSD card
Step 5 Tighten the screw on the M.2 SATA SSD card. See step (2) in Figure 7-125.
Step 6 Install the M.2 SSD riser card.
l For details about how to install an M.2 SSD riser card on the mainboard, see 7.22.2
Installing a PCIe Card on the Mainboard.
l For details about how to install an M.2 SSD riser card on a riser card, see 7.22.1
Installing a PCIe Card on the Riser Card.
Step 7 Connect the cable to the M.2 SSD riser card. For details, see M.2 SSD Riser Card Cabling
in 2.7 Internal Cabling.
Step 8 Install the chassis cover. For details, see 7.12 Installing the Chassis Cover.
Step 9 Install the 5288 V3. For details, see 3.4 Installing the Server.
Step 10 Connect all internal cables such as power and network cables. For details, see 3.5 Connecting
External Cables.
5288 V3 Server
User Guide
7 Replacing Parts
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 241
To Next Page
Loading...
