19 Management network port (Mgmt) 20 Rear hard disk (numbered 24 to 31
from left to right and from top to
bottom)
21 LAN on motherboard – –
l You can configure two rear 2.5-inch or 3.5-inch hard disks in position 1 shown in Figure
2-4. The hard disks are numbered A0 and B0 from top to bottom.
l You can configure one riser card and two rear 2.5-inch hard disks, or two rear 3.5-inch
hard disks on I/O module in position 7 shown in Figure 2-4. The hard disks are
numbered A1 and B1 from top to bottom.
I/O module supports only one riser card if the server with dual-CPU configuration is not
equipped with rear hard disks. One riser card provides two or three PCIe slots.
l You can configure a GE or 10GE flexible NIC in position 20 in Figure 2-4.
Flexible NICs
The 5288 V3 supports the following models of LANs on motherboard (flexible NICs):
l SM211: provides two GE electrical ports.
l SM210/SM212: provides four GE electrical ports.
l SM233: provides two 10GE electrical ports.
l SM231: provides two 10GE optical ports.
NOTE
For details about the flexible NICs supported by the 5288 V3, see Huawei Server Compatibility
Checker.
The following figures show flexible NIC ports and indicators.
Figure 2-5 SM211 ports and indicators
1
Data transmission status
indicator
2 Connection status indicator
Figure 2-6 SM210 or SM212 ports and indicators
5288 V3 Server
User Guide
2 Product Overview
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 10
To Next Page
Loading...
