Figure 9-16 PuTTY Configuration window
Step 4 Set the login parameters.
The parameters are described as follows:
l Host Name (or IP address): Enter the server IP address of the server to be accessed, for
example, 191.100.34.32.
l Port: Retain the default value 22.
l Connection type: Retain the default value SSH.
l Close window on exit: Retain the default value Only on clean exit.
NOTE
Configure Host Name (or IP address) and Saved Sessions, and click Save. You can double-click the
saved record under Saved Sessions to log in to the server the next time.
Step 5 Click Open.
The PuTTY window is displayed.
NOTE
If this is your first login to the server, the PuTTY Security Alert dialog box is displayed. Click Yes to
proceed.
Step 6 Enter the user name and password.
NOTE
If an incorrect user name or password is entered, you must set up a new PuTTY session.
5288 V3 Server
User Guide
9 Common Operations
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 261
To Next Page
Loading...
