Figure 3-6 Installing an L-shaped guide rail
2. Tighten the screws.
3. Install the other guide rail on the opposite side by using the same method.
Step 4 Install the 5288 V3.
1. Lift the 5288 V3 and move it to the cabinet. This task requires at least four people.
2. Place the 5288 V3 onto the guide rails and slide it into the cabinet. See step (1) in Figure
3-7.
5288 V3 Server
User Guide
3 Installing and Removing the 5288 V3
Issue 26 (2018-11-19) Copyright © Huawei Technologies Co., Ltd. 58
To Next Page
Loading...
