Figure 5-79 Interconnecting LED light tubes
Procedure
Step 1 Locate a failed light.
● If an LED light does not work but the cables to the light are intact, the LED has failed
and the LED light needs to be replaced.
● If all LED lights after a light do not work, the LED light adjacent to the working LED
light has failed.
Step 2 Replace the LED light.
1. Remove LED light tubes in the aisle one by one from the side not connected
to the power supply until the failed LED light is removed.
2. Replace the failed LED light with a new one, and reinstall the removed LED
lights one by one.
Figure 5-80 Replacing an LED light tube
FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator) 5 Parts Replacement
Issue 01 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 124
To Next Page
Loading...
