Figure 5-57 Installing temperature sensors
(1) Fastener
Step 4 Check that the temperature sensor works properly.
----End
5.4.10 Replacing a Temperature and Humidity Sensor
Prerequisites
● A temperature and humidity (T/H) sensor needs to be replaced.
● A spare T/H sensor of the same model is available and functional.
Context
A T/H sensor can be maintained only from the rear door.
Procedure
Step 1 Tap Shutdown on the controller home screen.
FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator) 5 Parts Replacement
Issue 01 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 105
To Next Page
Loading...
