5.4.2.8 Replacing a Camera
Impact on the System
The operation of the video surveillance system will be interrupted.
Preparations
● Tools: ESD wrist strap, ESD gloves, step ladder, label, marker, Phillips
screwdriver
● Material: camera
Procedure
Step 1 Remove the transparent cover using a Phillips screwdriver.
Figure 5-31 Removing the transparent cover
Step 2 Remove the SD card.
Figure 5-32 Removing an SD card
Step 3 Remove the monitoring network cable from the camera and remove the camera.
FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator) 5 Parts Replacement
Issue 01 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 84
To Next Page
Loading...
