Procedure
Step 1 Remove the button.
1. Lift the side panel of the door post.
2. Remove the side panel of the door post outwards.
3. Remove the button connection cable, the nut on the button installation
position, and then the button.
Figure 5-36 Removing the button
Step 2 Use the nut furnished with the new button to secure the button to the post and
connect the cable to the button.
Step 3 Verify that the button function is normal.
Step 4 Reinstall the post side panel.
----End
5.4.3.4 Replacing a Sliding Door Magnetic Lock
Context
The BOM number of a sliding door magnetic lock is 02070037. The following
components are required for installing a magnetic lock.
FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator) 5 Parts Replacement
Issue 01 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 88
To Next Page
Loading...
