Huawei FusionModule2000 - About This Document; Purpose; Intended Audience

About This Document
Purpose
This document describes FusionModule2000 smart modular data center
(FusionModule2000 for short) in terms of routine maintenance, troubleshooting,
and parts replacement. It aids regular
verication, maintenance and prompt
solutions for device potential faults.
Intended Audience
This document is intended for:
● Technical support engineers
● Commissioning engineers
● Data
conguration engineers
● Maintenance engineers
● Electrical engineers
Symbol Conventions
The symbols that may be found in this document are
dened as follows.
Symbol
Description
Indicates a hazard with a high level of risk which, if not
avoided, will result in death or serious injury.
Indicates a hazard with a medium level of risk which, if not
avoided, could result in death or serious injury.
Indicates a hazard with a low level of risk which, if not
avoided, could result in minor or moderate injury.
Indicates a potentially hazardous situation which, if not
avoided, could result in equipment damage, data loss,
performance deterioration, or unanticipated results.
NOTICE is used to address practices not related to personal
injury.
FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator) About This Document
Issue 01 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. ii