Huawei FusionModule2000 Maintenance Guide

Item Method Expected Result Troubleshooting
ECC800-Pro RUN
indicator (green)
Check the
RUN indicator
on the
ECC800-Pro
main control
module.
The RUN indicator
blinks slowly.
● If the RUN
indicator blinks
fast, check
whether the
communications
cable is properly
connected
between the
ECC800-Pro and
the host.
● If the RUN
indicator is
o,
rectify any input
power grid fault.
Ambient
temperature
detection
- The ambient
temperature of the
smart module
should be lower
than 45°C.
Find the cause of an
abnormal
temperature.
Indicators on the
iBOX (CIM) and
iBAT (BIM)
Visual
inspection
● The RUN
indicator blinks
at long intervals.
● The ALM
indicator is o.
● If the RUN
indicator blinks
at short intervals,
check whether
the
communications
cable is loose or
disconnected. If
so, reconnect the
cable. If not,
replace the cable.
● If the ALM
indicator is
steady on, clear
the alarm by
referring to the
iBattery user
manual.
FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator) 3 Routine Maintenance
Issue 01 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 27

Huawei FusionModule2000 Specifications

General

Brand	Huawei
Model	FusionModule2000
Category	Storage
Language	English