Huawei FusionModule2000 - Page 60

NO TE
Conguration information and fault logs may be required for handing certain alarms. For
details, see the
Fault Information Collection Guide .
Alarm Handling
After locating the component or module for which the alarm is generated, rectify
the fault.
Figure 4-2 Alarm Handling
owchart
After an alarm is cleared, prepare a report to record the alarm handling process.
NO TE
Common alarm references are as follows:
● Data center infrastructure alarm reference in the online help of the management system
● Alarm references in documents delivered with components
● Alarm reference in this document
● Alarm reference obtained from Huawei technical support
It is recommended that the alarm handling report consists of information about the alarm
occurrence time, location, symptom, fault locating process, alarm handling process, and
alarm prevention solutions.
FusionModule2000 Smart Modular Data Center
Maintenance Guide (Fusion Module Actuator) 4 Alarms and Troubleshooting
Issue 01 (2020-12-25) Copyright © Huawei Technologies Co., Ltd. 53