conditions (such as typhoons and monsoons) or terrains (such as dams and
hills).
● When installing the equipment, ensure that the installation surface is solid
enough to bear the weight of the equipment.
● After installing the equipment, remove the packing materials such as cartons,
foam, plastics, and cable ties from the equipment area.
Figure 1-3 Installation environment
● The operation and service life of the battery depend on the operating temperature.
Install the battery at a temperature equal to the ambient temperature or in a better
environment.
● The operating temperature of the LUNA2000 ranges from –20°C to +55°C. If the
LUNA2000 is installed in a cold environment, the built-in thermal control system starts
to heat the battery to achieve better performance. The heating process consumes
rechargeable power, which reduces the system energy
eciency in cold weather.
● If the LUNA2000 is stored in a cold environment (for example, 0°C) before installation,
the LUNA2000 needs some time (< 2 h) to heat up before it can be charged. You are
advised to place the LUNA2000 in a warm place before installation to facilitate
commissioning.
● When the ambient temperature of the LUNA2000 is higher than +45°C or lower than –
10°C, the battery charge and discharge power will be derated.
iSitePower-M (MAP05A1, MAB05B1)
User Manual 1 Safety Information
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 10
To Next Page
Loading...
