Parameters Settings
Figure 6-17 Setting basic parameters
Table 6-8 Basic parameters
Parameter
Description
Output Voltage Set the output voltage and output frequency based on the
local power grid standards.
Output Frequency
Bypass Input
Overvoltage Limit
Set the bypass input overvoltage and undervoltage
protection thresholds. When the bypass input voltage
reaches the preset value, the system stops output
immediately and reports a bypass module protection
alarm.
Bypass Input
Undervoltage Limit
Mains/Genset
Detection Port
Select a mains/genset detection port.
iSitePower-M (MAP05A1, MAB05B1)
User Manual 6 Application Scenarios
Issue 06 (2023-04-24) Copyright © Huawei Digital Power Technologies Co., Ltd. 62
To Next Page
Loading...
