B General Layout
The NetCol5000-A consists of an indoor unit and an outdoor unit that are
connected over refrigerant pipes. Figure Cooling component layout shows the
cooling component layout.
Figure B-1 Cooling component layout
(1) Compressor
(2) Discharge pipe (3) Oil separator (4) Check valve
(5) Discharge pipe
needle valve
(6) Oil trap (7) Outdoor unit (8) Inverted trap
(9) Needle valve on
liquid pipe
(10) Liquid storage
tank
(11) Dry lter (12) Sight glass
(13) Solenoid valve (14) Thermostatic
expansion valve
(15) Low-pressure
needle valve
(16) Distributor
(17) Evaporator (18) Indoor fan (19) Suction pipe
NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm Width) B General Layout
Issue 17 (2020-10-22) Copyright © Huawei Technologies Co., Ltd. 226
To Next Page
Loading...
