4.7.13 Importing a Certicate and Key
Prerequisites
You have copied CA certicate le, local certicate le, and key le into a USB
disk that is connected to the USB controller port shown in Figure 4-2 and has
been recognized.
● Ensure that the key le has been encrypted using AES128.
● Before using a USB ash drive, ensure that its data has been scanned by
antivirus software and is secure.
Procedure
Step 1 On the home page, choose Maint > USB Operations > Import
Certicate, as
shown in Figure 4-51.
Figure 4-51 Import certicate
Step 2 Click Browse... next to Upload CA certicate le.
Step 3 Select the CA
certicate le to be imported.
Step 4 Upload local certicate le and key le in turn in the same way.
Step 5 Enter Key password and
Conrm key password.
Step 6 Click Submit.
----End
NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm Width) 4 ACC Introduction
Issue 17 (2020-10-22) Copyright © Huawei Technologies Co., Ltd. 134