Place the sheet metal of the water sensor upwards and its detection board
downwards on the ground.
Figure 3-43 Routing cables of water sensor (unit: m)
----End
3.11.5 Teamwork Networking and Monitoring
Context
Teamwork communication ports 1 and 2 are used to enable the teamwork
networking communication over CAN and EMS monitoring communication over
RS485. Figure 3-44 shows the communications cable ports on the main control
board.
NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm Width) 3 Installation Guide
Issue 17 (2020-10-22) Copyright © Huawei Technologies Co., Ltd. 74
To Next Page
Loading...
