2.2.4 Monitoring System
The monitoring system provides logic control, data collection, control command
delivery, alarm reporting, data storage, user right management, and teamwork
control. The smart cooling product can be connected to the monitoring system
over an RS485 northbound communications port for remote management. A
maximum of 32 smart cooling products can be connected in teamwork control
mode. To use this mode, set any one of the smart cooling products as the master
unit and connect the master unit to the monitoring network.
Figure 2-5 shows a diagram of the monitoring network.
Figure 2-5 Networking diagram
2.3 Working Conditions
Environmental
Specications
Do not install the smart cooling product near a noise-sensitive place such as an oce or a
conference room.
Table 2-2 Operation conditions
Item
Specications
Operating temperature 18°C to 45°C
Operating humidity 20% RH to 80% RH
NetCol5000-A(025, 035) In-row Air Cooled Smart
Cooling Product
User Manual (600 mm Width) 2 Product Description
Issue 17 (2020-10-22) Copyright © Huawei Technologies Co., Ltd. 17