Huawei Quidway S3100 Series User Manual

Operation Manual – ACL
Quidway S3100 Series Ethernet Switches Chapter 1
ACL Configuration
Huawei Technologies Proprietary
1-7
Table 1-6 TCP/UDP-related rule information
Parameter Type Function Description
source-port
operator port1
[ port2 ]
Source port
Specifies the
source port
information for
TCP/UDP
packets
destination-port
operator port1
[ port2 ]
Destination
port
Defines the
destination port
information for
TCP/UDP
packets
The operator argument can
be lt (less than), gt (greater
than), eq (equal to), neg
(not equal to), or range
(within a range). The port2
argument is required only
when the operator
argument is range.
port1, port2: optional
parameter. TCP/UDP port
number, which can be port
names or numbers ranging
from 0 to 65535.
established
The identifier
for the
establishment
of TCP
connection.
Specifies the
rule to match
the packets
with ack or rst
tags.
This keyword is for TCP
only.
If you specify ICMP as the protocol type, you can specify the parameters listed in Table
1-7
.
Table 1-7 ICMP-related rule information
Parameter Type Function Description
icmp-type
icmp-type
icmp-code
ICMP
packet type
and
message
code
Specifies the
ICMP packet
type and
message code
for the rule.
icmp-type: ICMP message
type, an integer ranging from
0 to 255.
icmp-code: ICMP message
code, an integer ranging
from 0 to 255.
Table 1-8 lists common ICMP message types.

Huawei Quidway S3100 Series Specifications

General

Brand	Huawei
Model	Quidway S3100 Series
Category	Switch
Language	English