S1700 Managed Series Ethernet Switches
Web User Manual
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
SNTP Server Configuration:set SNTP server parameters.
Time configuration: manually configure time for system
clock.
View and manage VLAN, local management of
IPv4 and IPv6 addresses.
Perform ARP configuration.
Configure static neighbor table, view dynamic
neighbor table, configure and view router
advertise.
Base attribute of interface: display the connection status, to
configure relevant parameters for individual interface or a
group of interfaces.
Interface traffic statistic: display traffic statistic information
of each interface.
Priority: configure system priority.
Traffic sharing mode: configure traffic sharing mode.
Trunk: view and configure Trunk.
Trunk ID member peer-to-peer information: check Trunk
member information.
Create, delete and edit VLAN, edit/display
members based on VLAN, and edit members
according to interface/interface range.
Create and delete MAC VLAN, display MAC
VLAN list based on VLAN or MAC address, and
enable/disable MAC VLAN according to
interface/interface range.
Perform Voice VLAN relevant configuration
MAC address list information: display/clear dynamic MAC
address.
MAC ageing time: configure MAC address ageing time.
Static MAC configuration: create/delete static MAC
address.
Black hole MAC configuration: create/delete static black
hole MAC address.
MAC filter configuration: enable/disable MAC filter at
specified interface.
Address list information migration: display MAC address
migration information.
Relevant parameters of spanning tree can be
configured in overall mode and based on interfaces.
Implement following configuration management:
global parameter, VLAN parameter, interface
learning, multicast group policy, static multicast
group, multicast group, querier, routing interface
and forwarding list.
Configure effective period of applying ACL rules.
Apply rules to specified interface or VLAN.
To Next Page
Loading...
