S1700 Managed Series Ethernet Switches 
Web User Manual 
Huawei Proprietary and Confidential           
Copyright © Huawei Technologies Co., Ltd. 
Apply rules  to  HTTP protocol  data  of  accessing 
switch. 
Configure  trust  model  and  default  CoS  value  of 
specified interface. 
Perform mapping to CoS value and service grade. 
Perform mapping to DSCP value and service grade. 
Perform  mapping  to  IP  Precedence  value  and 
service grade. 
Map different service grades to hardware queue of 
switch. 
Configure  QoS  scheduling  method  and  WRR 
weighted value. 
Create different classes of flows to control network 
traffic. 
Control the maximal transmission rate of interface, 
and limit the output traffic of network. 
Add and check static IPv4 routing. 
Add and check static IPv6 routing. 
Perform user account relevant configuration 
Perform 802.1X relevant configuration 
Perform the relevant configuration of storm control 
and suppression. 
Authenticate  MAC  address  of  device  to  achieve 
authentication access. 
Configure anti-attack settings. 
Perform DHCP Snooping configuration. 
Perform IP source protection configuration. 
Perform dynamic address detection configuration. 
Perform  illegal  message  and  MAC  spoofing 
configurations. 
Perform interface isolation configuration