Huawei S1720 Series Configuration Guide

4.13 Maintaining OSPF
Maintaining OSPF involves resetting OSPF and clearing OSPF statistics.
4.13.1 Resetting OSPF
Restarting OSPF can reset OSPF.
Context
CAUTION
The OSPF neighbor relationship is deleted after you reset OSPF connections with the reset
ospf command. Exercise caution when running this command.
To reset OSPF connections, run the following reset ospf commands in the user view.
Procedure
l Run the reset ospf [ process-id ] process [ flush-waiting-timer time ] command in the
user view to Restart the OSPF process.
----End
4.13.2 Clearing OSPF
This section describes how to clear OSPF statistics, including OSPF counters, imported
routes, and GTSM statistics on the board.
Context
CAUTION
OSPF information cannot be restored after being cleared. Exercise caution when running this
command.
To clear the OSPF information, run the following reset ospf commands in the user view.
Procedure
l Run the reset ospf [ process-id ] counters [ neighbor [ interface-type interface-number ]
[ router-id ] ] command in the user view to clear OSPF counters.
l Run the reset ospf [ process-id ] redistribution command in the user view to clear the
routes imported by OSPF.
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 4 OSPF Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
135

Huawei S1720 Series Specifications

General

Operating Humidity	5% to 95% (non-condensing)
Uplink Ports	4 x GE combo ports
VLANs	4094
Power Supply	AC 100-240V, 50/60Hz
Layer 2 Features	VLAN
Layer 3 Features	Static routing
Management	SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to +70°C
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm