Huawei S1720 Series Configuration Guide

9 MBGP Configuration
About This Chapter
MBGP is dedicated to transmitting multicast routing information across ASs.
9.1 MBGP Overview
MBGP is the multiprotocol extension of BGP.
9.2 MBGP Features Supported by the S6700
You can configure such features as load splitting, route aggregation, route dampening,
community attributes, and route reflectors when configuring MBGP.
9.3 Configuring Basic MBGP Functions
Before constructing an MBGP network, you need configure basic functions of MBGP.
9.4 Configuring the Policy for Advertising MBGP Routes
You can configure a route advertisement policy to determine which routing information need
be advertised to peers.
9.5 Configuring the Policy for Exchanging Routes Between MBGP Peers
By configuring a proper route exchange policy, you can control the routing information
exchanged between MBGP peers.
9.6 Configuring MBGP Route Attributes
MBGP has many route attributes. You can change MBGP route selection by setting these
attributes.
9.7 Configuring MBGP Route Dampening
Configuring MBGP dampening can suppress the unstable MBGP routing information.
9.8 Maintaining MBGP
Maintaining MBGP involves resetting MBGP connections and clearing MBGP statistics.
9.9 Configuration Examples
MBGP configuration examples are provided, including networking requirements and diagram,
configuration roadmap, and configuration notes.
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 9 MBGP Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
554

Huawei S1720 Series Specifications

General

Operating Humidity	5% to 95% (non-condensing)
Uplink Ports	4 x GE combo ports
VLANs	4094
Power Supply	AC 100-240V, 50/60Hz
Layer 2 Features	VLAN
Layer 3 Features	Static routing
Management	SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to +70°C
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm