Huawei S1720 Series Configuration Guide

number } command to check the routes that match a specified MBGP community attribute
filter.
l Run the display bgp multicast network command to check the routing information to be
advertised by MBGP through network command.
l Run the display bgp multicast routing-table [ network [ { mask | mask-length } [ longer-
prefixes ] ] ] command to check the MBGP routing table.
l Run the display bgp multicast routing-table cidr command to check CIDR routes.
l Run the display bgp multicast routing-table statistics command to check the statistics
of the MBGP routing table.
----End
9.5 Configuring the Policy for Exchanging Routes Between
MBGP Peers
By configuring a proper route exchange policy, you can control the routing information
exchanged between MBGP peers.
9.5.1 Establishing the Configuration Task
Before configuring a policy for exchanging routes between MBGP peers, familiarize yourself
with the applicable environment, pre-configuration tasks, and required data. This can help you
complete the configuration task quickly and accurately.
Applicable Environment
Based on the actual network, users can configure the related route exchange polices to control
the routing information transmitted between MBGP peers.
For a switch configured with MBGP, the routes exchanged between peers are classified into the
following types:
l import: filters the routes sent by a specified peer. Only the routes that pass the filtering are
received.
l export: filters the routes sent to a specified peer or peer group. Only the routes that pass
the filtering are sent.
Pre-configuration Task
Before configuring the route filtering policy between MBGP peers, complete the following task:
l Configuring Basic MBGP Functions
Data Preparation
To configure the route filtering policy between MBGP peers, you need the following data.
No.
Data
1 Number of the AS where the peer resides
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 9 MBGP Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
566

Huawei S1720 Series Specifications

General

Operating Humidity	5% to 95% (non-condensing)
Uplink Ports	4 x GE combo ports
VLANs	4094
Power Supply	AC 100-240V, 50/60Hz
Layer 2 Features	VLAN
Layer 3 Features	Static routing
Management	SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to +70°C
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm