Huawei S1720 Series Configuration Guide

After the command is used, policy filtering is immediately effective. You can run the command
to configure BGP to immediately apply new policies.
The polices affected by the timer are ACLs, IP prefix lists, AS-Path filters, community filters,
extended community filters, RD filters, and Route-Policies.
----End
10.8.3 Checking the Configuration
After the delay for applying a routing policy is configured, you can check the configuration.
Prerequisites
The configurations for controlling the valid time of the routing policy are complete.
Procedure
l Run the display current-configuration | include notify-delay command to check the
delay for applying the routing policy.
----End
10.9 Maintaining the Routing Policy
Maintaining routing policies involves clearing the statistics of the IP prefix list and debugging
routing policies.
Context
CAUTION
The statistics of IP prefix lists cannot be restored after being cleared. Exercise caution when
running this command.
By default, the statistics of IP prefix lists are not cleared.
Procedure
l Run reset ip ip-prefix [ ip-prefix-name ] command in the user view to clear the IPv4 prefix
list statistics.
l Run reset ip ipv6-prefix [ ipv6-prefix-name ] command in the user view to clear the IPv6
prefix list statistics.
----End
10.10 Configuration Examples
This section provides several configuration examples of the routing policy.
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 10 Routing Policy Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
616

Huawei S1720 Series Specifications

General

Operating Humidity	5% to 95% (non-condensing)
Uplink Ports	4 x GE combo ports
VLANs	4094
Power Supply	AC 100-240V, 50/60Hz
Layer 2 Features	VLAN
Layer 3 Features	Static routing
Management	SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to +70°C
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm