Huawei S1720 Series Configuration Guide

Procedure
l Run the display bgp peer [ ipv4-address ] verbose command to check detailed information
about MD5 and keychain authentication on BGP peers.
l Run the display bgp peer verbose command to check whether the GTSM function is
enabled on BGP peers and check the configured maximum valid TTL value.
l Run the display gtsm statistics all command to check GTSM statistics on all boards,
including the total number of packets, the number of passed packets, and the number of
dropped packets.
----End
7.19 Maintaining BGP
Maintaining BGP involves resetting a BGP connection and clearing BGP statistics.
7.19.1 Resetting BGP Connections
You can also reset BGP in GR mode. Resetting a BGP connection will interrupt the peer
relationship.
Context
CAUTION
The BGP peer relationship is interrupted after you reset BGP connections with the reset bgp
command. Exercise caution when running this command.
When the BGP routing policy on the switch that does not support Route-refresh changes, you
need to reset BGP connections to validate the configuration. To reset BGP connections, run the
following reset commands in the user view.
Procedure
l To validate the new configurations, run the reset bgp all command in the user view to reset
all BGP connections.
l To validate the new configurations, run the reset bgp as-number command in the user view
to reset the BGP connection between the specified AS.
l To validate the new configurations, run the reset bgp ipv4-address command in the user
view to reset the BGP connection between a specified peer.
l To validate the new configurations, run the reset bgp external command in the user view
to reset all the EBGP connections.
l To validate the new configurations, run the reset bgp group group-name command in the
user view to reset the BGP connection with the specified peer-groups.
l To validate the new configurations, run the reset bgp internal command in the user view
to reset all IBGP connections.
----End
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 7 BGP Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
442

Huawei S1720 Series Specifications

General

Operating Humidity	5% to 95% (non-condensing)
Uplink Ports	4 x GE combo ports
VLANs	4094
Power Supply	AC 100-240V, 50/60Hz
Layer 2 Features	VLAN
Layer 3 Features	Static routing
Management	SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to +70°C
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm