EasyManuals Logo

Huawei S1720 Series Configuration Guide

Huawei S1720 Series
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #224 background imageLoading...
Page #224 background image
NOTE
The filter-policy command takes effect only on the routes imported through the import-route command
by the ASBR, that is, filters the imported routes. The routes that are filtered out do not generate LSAs and
cannot be advertised by OSPFv3. If the import-route command is not configured to import other external
routes (including OSPFv3 routes in different processes), the filter-policy command does not takes effect.
----End
5.8.5 Checking the Configuration
After OSPFv3 route attributes are configured, you can check the OSPFv3 interface, LSDB, and
routing table.
Prerequisites
The configurations for Controlling OSPFv3 Routing Information are complete.
Procedure
l Run the commands as follow to check the OSPFv3 route aggregation:
display ospfv3 [ process-id ] abr-summary-list [ ipv6-address prefix-length ]
l Run the commands as follow to check the LSDB information about OSPFv3:
display ospfv3 [ process-id ] lsdb [ area area-id ] [ originate-router advertising-
router-id | self-originate ] [ { router | network | inter-router [ asbr-router asbr-
router-id ] | { inter-prefix | nssa } [ ipv6-address prefix-length ] | link | intra-prefix |
grace } [ link-state-id ] ]
display ospfv3 [ process-id ] lsdb [ originate-router advertising-router-id | self-
originate ] external [ ipv6-address prefix-length ] [ link-state-id ]
l Run the commands as follow to check the OSPFv3 routing table:
display ospfv3 [ process-id ] routing uninstalled
display ospfv3 [ process-id ] routing [ abr-routes | asbr-routes | statistics
[ uninstalled ] | ipv6-address prefix-length | intra-routes | inter-routes | ase-routes |
nssa-routes ]
----End
5.9 Optimizing an OSPFv3 Network
By configuring OSPFv3 functions in special network environments, you can adjust and optimize
the OSPFv3 network performance.
5.9.1 Establishing the Configuration Task
Before optimizing an OSPFv3 network, familiarize yourself with the applicable environment,
complete pre-configuration tasks, and obtain the required data. This can help you complete the
configuration task quickly and accurately.
Applicable Environment
By adjusting the OSPFv3 timer, you can change the convergence speed of an OSPFv3 network
and the network overload caused by protocol packets. On low-speed links, you need to consider
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 5 OSPFv3 Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
205

Table of Contents

Other manuals for Huawei S1720 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei S1720 Series and is the answer not in the manual?

Huawei S1720 Series Specifications

General IconGeneral
Operating Humidity5% to 95% (non-condensing)
Uplink Ports4 x GE combo ports
VLANs4094
Power SupplyAC 100-240V, 50/60Hz
Layer 2 FeaturesVLAN
Layer 3 FeaturesStatic routing
ManagementSNMP
Operating Temperature0°C to 45°C
Storage Temperature-40°C to +70°C
Dimensions (W x D x H)442 mm x 220 mm x 43.6 mm

Related product manuals