Huawei S1720 Series Configuration Guide

[SwitchA] display ospf interface
OSPF Process 1 with Router ID 1.1.1.1
Interfaces
Area: 0.0.0.0
IP Address Type State Cost Pri DR BDR
192.168.1.1 Broadcast DR 1 100 192.168.1.1 192.168.1.3
[SwitchB] display ospf interface
OSPF Process 1 with Router ID 2.2.2.2
Interfaces
Area: 0.0.0.0
IP Address Type State Cost Pri DR BDR
192.168.1.2 Broadcast DROther 1 0 192.168.1.1 192.168.1.3
All neighbors are in the full state. This indicates that SwitchA sets up neighbor relationships
with all its neighbors. If the neighbor remains "2-Way", it indicates both of them are not
DRs or BDRs. Thus, they need not exchange LSAs.
All other neighbors are DR Others. This indicates that they are neither DRs nor BDRs.
Configuration Files
l Configuration file of SwitchA
#
sysname SwitchA
#
router id 1.1.1.1
#
vlan batch 10
#
interface Vlanif10
ip address 192.168.1.1 255.255.255.0
ospf dr-priority 100
#
interface XGigabitEthernet0/0/1
port trunk allow-pass vlan 10
#
ospf 1
area 0.0.0.0
network 192.168.1.0 0.0.0.255
#
return
l Configuration file of SwitchB
#
sysname SwitchB
#
router id 2.2.2.2
#
vlan batch 10
#
interface Vlanif10
ip address 192.168.1.2 255.255.255.0
ospf dr-priority 0
#
interface XGigabitEthernet0/0/1
port trunk allow-pass vlan 10
#
ospf 1
area 0.0.0.0
network 192.168.1.0 0.0.0.255
#
return
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 4 OSPF Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
155

Huawei S1720 Series Specifications

General

Operating Humidity	5% to 95% (non-condensing)
Uplink Ports	4 x GE combo ports
VLANs	4094
Power Supply	AC 100-240V, 50/60Hz
Layer 2 Features	VLAN
Layer 3 Features	Static routing
Management	SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to +70°C
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm