Huawei S1720 Series Configuration Guide

# Configure Switch A.
[SwitchA] ospf
[SwitchA-ospf-1] graceful-restart
# Configure SwitchB.
[SwitchB] ospf
[SwitchB-ospf-1] graceful-restart
Step 4 Verify the configuration.
# View the GR status of Switch A.
[SwitchA] display ospf graceful-restart
OSPF Process 1 with Router ID 1.1.1.1
Graceful-restart capability : enabled
Graceful-restart support : planned and un-planned, totally
Helper-policy support : planned and un-planned, strict lsa check
Current GR state : normal
Graceful-restart period : 120 seconds
Number of neighbors under helper:
Normal neighbors : 0
Virtual neighbors : 0
Sham-link neighbors : 0
Total neighbors : 0
Number of restarting neighbors : 0
Last exit reason:
On graceful restart : none
On Helper : none
# Verify the GR feature of Switch A.
[SwitchA] quit
<SwitchA> reset ospf process graceful-restart
# View the neighbor status on SwitchB.
[SwitchB] display ospf peer
OSPF Process 1 with Router ID 1.1.1.2
Neighbors
Area 0.0.0.0 interface 1.1.1.2(Vlanif10)'s neighbors
Router ID: 1.1.1.1 Address: 1.1.1.1 GR State: Doing GR
State: Full Mode:Nbr is Slave Priority: 1
DR: 1.1.1.2 BDR: 1.1.1.1 MTU: 0
Dead timer due in 29 sec
Neighbor is up for 00:01:01
Authentication Sequence: [ 0 ]
The status of the neighbor is Full.
----End
Configuration Files
l Configuration file of Switch A
#
sysname SwitchA
#
router id 1.1.1.1
#
vlan batch 10
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 4 OSPF Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
163

Huawei S1720 Series Specifications

General

Operating Humidity	5% to 95% (non-condensing)
Uplink Ports	4 x GE combo ports
VLANs	4094
Power Supply	AC 100-240V, 50/60Hz
Layer 2 Features	VLAN
Layer 3 Features	Static routing
Management	SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to +70°C
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm