EasyManuals Logo

Huawei S1720 Series Configuration Guide

Huawei S1720 Series
664 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #354 background imageLoading...
Page #354 background image
The configuration details are not mentioned here.
3. Configure basic IS-IS functions.
The configuration details are not mentioned here.
4. Set the number of equal-cost routes for load balancing to 1 on Switch A.
[SwitchA] isis 1
[SwitchA-isis-1] maximum load-balancing 1
[SwitchA-isis-1] quit
# Display the routing table of SwitchA.
[SwitchA] display isis route
Route information for ISIS(1)
-----------------------------
ISIS(1) Level-2 Forwarding Table
--------------------------------
IPV4 Destination IntCost ExtCost ExitInterface NextHop
Flags
-------------------------------------------------------------------------
192.168.1.0/24 20 NULL Vlanif20 10.1.2.2
A/-/-/-
10.1.1.0/24 10 NULL Vlanif10 Direct D/-/
L/-
172.16.1.0/24 10 NULL Vlanif50 Direct D/-/
L/-
172.17.1.0/24 30 NULL Vlanif10 10.1.1.2
A/-/-/-
10.1.2.0/24 10 NULL Vlanif20 Direct D/-/
L/-
192.168.0.0/24 20 NULL Vlanif10 10.1.1.2
A/-/-/-
Flags: D-Direct, A-Added to URT, L-Advertised in LSPs, S-IGP Shortcut,
U-Up/Down Bit Set
As shown in the routing table, when the maximum number of equal-cost routes for load
balancing is set to 1, IS-IS chooses the next hop 10.1.1.2 (Switch B) as the only best route
to the destination network 172.17.1.0. This is because Switch B has a smaller system ID.
5. Restore the default number of equal-cost routes for load balancing on Switch A.
[SwitchA] isis 1
[SwitchA-isis-1] undo maximum load-balancing
[SwitchA-isis-1] quit
# Display the routing table of SwitchA.
[SwitchA] display isis route
Route information for ISIS(1)
-----------------------------
ISIS(1) Level-2 Forwarding Table
--------------------------------
IPV4 Destination IntCost ExtCost ExitInterface NextHop
Flags
-------------------------------------------------------------------------
192.168.1.0/24 20 NULL Vlanif20 10.1.2.2
A/-/-/-
10.1.1.0/24 10 NULL Vlanif10 Direct D/-/
L/-
172.16.1.0/24 10 NULL Vlanif50 Direct D/-/
L/-
172.17.1.0/24 30 NULL Vlanif10 10.1.1.2
A/-/-/-
Vlanif20 10.1.2.2
S6700 Series Ethernet Switches
Configuration Guide - IP Routing 6 IS-IS Configuration
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
335

Table of Contents

Other manuals for Huawei S1720 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Huawei S1720 Series and is the answer not in the manual?

Huawei S1720 Series Specifications

General IconGeneral
Operating Humidity5% to 95% (non-condensing)
Uplink Ports4 x GE combo ports
VLANs4094
Power SupplyAC 100-240V, 50/60Hz
Layer 2 FeaturesVLAN
Layer 3 FeaturesStatic routing
ManagementSNMP
Operating Temperature0°C to 45°C
Storage Temperature-40°C to +70°C
Dimensions (W x D x H)442 mm x 220 mm x 43.6 mm

Related product manuals