Huawei S1720 Series Configuration Guide

2.3.5 Checking the Configuration.....................................................................................................................29
2.4 Configuring RIP Route Attributes....................................................................................................................29
2.4.1 Establishing the Configuration Task.......................................................................................................29
2.4.2 Configuring Additional Metrics of an Interface......................................................................................30
2.4.3 Configuring RIP Preference....................................................................................................................31
2.4.4 Setting the Maximum Number of Equal-Cost Routes.............................................................................31
2.4.5 Checking the Configuration.....................................................................................................................32
2.5 Controlling the Advertising of RIP Routing Information................................................................................32
2.5.1 Establishing the Configuration Task.......................................................................................................32
2.5.2 Configuring RIP to Advertise Default Routes.........................................................................................33
2.5.3 Disabling an Interface from Sending Update Packets.............................................................................33
2.5.4 Configuring RIP to Import External Routes............................................................................................35
2.5.5 Checking the Configuration.....................................................................................................................36
2.6 Controlling the Receiving of RIP Routing Information...................................................................................36
2.6.1 Establishing the Configuration Task.......................................................................................................36
2.6.2 Disabling an Interface from Receiving RIP Update Packets...................................................................37
2.6.3 Disabling RIP from Receiving Host Routes............................................................................................37
2.6.4 Configuring RIP to Filter the Received Routes.......................................................................................38
2.6.5 Checking the Configuration.....................................................................................................................39
2.7 Configuring RIP-2 Features..............................................................................................................................39
2.7.1 Establishing the Configuration Task.......................................................................................................39
2.7.2 Configuring RIP-2 Route Summarization...............................................................................................40
2.7.3 Configuring Packet Authentication of RIP-2..........................................................................................41
2.7.4 Checking the Configuration.....................................................................................................................42
2.8 Optimizing a RIP Network...............................................................................................................................43
2.8.1 Establishing the Configuration Task.......................................................................................................43
2.8.2 Configuring RIP Timers..........................................................................................................................44
2.8.3 Setting the Interval for Sending Packets and the Maximum Number of the Sent Packets......................45
2.8.4 Configuring Split Horizon and Poison Reverse......................................................................................45
2.8.5 Configuring RIP to Check the Validity of Update Packets.....................................................................46
2.8.6 Configuring RIP Neighbors.....................................................................................................................47
2.8.7 Checking the Configuration.....................................................................................................................47
2.9 Configuring the Network Management Function in RIP.................................................................................48
2.9.1 Establishing the Configuration Task.......................................................................................................48
2.9.2 Binding RIP to MIBs...............................................................................................................................48
2.9.3 Checking the Configuration.....................................................................................................................49
2.10 Configuration Examples.................................................................................................................................49
2.10.1 Example for Configuring the RIP Version............................................................................................49
2.10.2 Example for Configuring RIP to Import Routes...................................................................................53
3 RIPng Configuration...................................................................................................................59
3.1 RIPng Overview...............................................................................................................................................60
3.2 RIPng Features Supported by the S6700..........................................................................................................61
S6700 Series Ethernet Switches
Configuration Guide - IP Routing Contents
Issue 01 (2012-03-15) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
v

Huawei S1720 Series Specifications

General

Operating Humidity	5% to 95% (non-condensing)
Uplink Ports	4 x GE combo ports
VLANs	4094
Power Supply	AC 100-240V, 50/60Hz
Layer 2 Features	VLAN
Layer 3 Features	Static routing
Management	SNMP
Operating Temperature	0°C to 45°C
Storage Temperature	-40°C to +70°C
Dimensions (W x D x H)	442 mm x 220 mm x 43.6 mm