Huawei SmartAX MA5608T Hardware Description

l The power module supplies power to each functional module of the board.
l The clock module provides clock signals for each functional module of the board.
The service process is as follows:
l In the upstream direction, after passing the interface module, the GE signals from the
backplane are converted into the TDM frames. Then, the TDM frames are transmitted
upstream.
l In the downstream direction, the interface module receives the signals from the TDM
line, and converts and encapsulates the signals into GE packets. After being transmitted
to the backplane bus through the service processing module, the GE packets are
transmitted to the control board. Then, the control board forwards the GE packets to the
related service boards.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
3 Board
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
354

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE