Huawei SmartAX MA5608T Hardware Description

Table 3-82 Specifications lists of 32-channel ADSL2+ service boards
Specifications H808ADIF H808ADLE H805ADLF H808ADLF
Applicable Line ADSL2+ over
ISDN
ADSL2+ over
POTS
ADSL2+ over POTS ADSL2+ over POTS
Physical Layer
Retransmission
(G.INP)
No No No No
ADSL2+
Bonding
No No No No
INM No No No No
SELT Yes Yes Yes Yes
MELT No No No No
Annex Type
l G.992.1 Annex
B/J
l G.992.3 Annex
B/J
l G.992.5 Annex
B/J
l G.992.1 Annex
A
l G.992.3 Annex
A/L/M (EU32-
EU64)
l G.992.5 Annex
A/M (EU32-
EU64)
l G.992.1 Annex
A
l G.992.3 Annex
A/L/M (EU32-
EU64)
l G.992.5 Annex
A/M (EU32-
EU64)
l G.992.1 Annex A
l G.992.3 Annex
A/L/M (EU32-
EU64)
l G.992.5 Annex
A/M (EU32-EU64)
Flexible
Configuration
Modes
Supports RFC2662 and RFC4706. (Users with a super user account can log in to the
system and run the switch adsl mode to command in diagnose mode to switch between the
configuration modes. The default configuration mode is RFC2662)
Connector Champ 64-pin Champ 64-pin Champ 64-pin Champ 64-pin
Built-in Splitter No Yes (600-ohm
pure impedance
splitter)
No No
Temperature
Query and
High-
temperature
Alarm
Yes Yes Yes Yes
Automatic
Power
Shutdown in
Case of a High
Temperature
No Yes (Supported by
V800R009C00
and later)
No Yes (Supported by
V800R009C00 and
later)
3.21.2 64-Channel ADSL2+ Service Board Comparison
The 64-channel ADSL2+ service boards support ADSL2+ over POTS, ADSL2+ over ISDN,
or ADSL2+ access services.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
3 Board
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
520

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE