Huawei SmartAX MA5608T Hardware Description

Table 3-227 Pin assignments of the IN1 port
Pin Signa
l
Pin Signa
l
Port Pin Signa
l
Pin Signa
l
1 39 17 47
64
48
32
16
1
17
33
49
33 55 49 63
2 18 34 50
3 38 19 46 35 54 51 62
4 20 36 52
5 37 21 45 37 53 53 61
6 22 38 54
7 36 23 44 39 52 55 60
8 24 40 56
9 35 25 43 41 51 57 59
10 26 42 58
11 34 27 42 43 50 59 58
12 28 44 60
13 33 29 41 45 49 61 57
14 30 46 62
15 32 31 40 47 48 63 56
16 32 48 64
3.28 Filler Panel
A filler panel is used to cover a slot that is not in use in a subrack.
Functions
The filler panel supports the following functions:
l Prevents electrical parts in the subrack from being exposed.
l Prevents foreign objects from entering the subrack.
l Ensures that the subrack meets electromagnetic interference (EMI) requirements.
l Ensures that cold air inside the subrack flows along the specified air channel.
l Helps to lay out cables reserved for future capacity expansion when the filler panel
provides interfaces.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
3 Board
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
837

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE