Huawei SmartAX MA5608T Hardware Description

ATM/PTM packets, encapsulates the ATM/PTM packets into IP packets, and performs
CAR on the IP packets. Controlled by the logic switch, the IP packets are transmitted to
the backplane bus through the backplane interface.
l In the downstream direction, the forwarding module decapsulates the IP packets sent
from the backplane bus, perform CAR on the packets, reassembles the packets into
ATM/PTM packets, and then transmits the ATM/PTM packets to the interface module.
The interface module then converts the ATM/PTM packets into analog signals, and
transmits the analog signals to the subscriber line through the splitter module.
SmartAX MA5600T/MA5603T/MA5608T Multi-service
Access Module
Hardware Description
3 Board
Issue 24 (2018-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
698

Huawei SmartAX MA5608T Specifications

General

Dual Power Supply	Yes
Humidity	5% to 95% (non-condensing)
Uplink Slots	2
Maximum GPON Ports	16
Input Voltage Range	-38.4 V DC to -72 V DC
Device Type	OLT
Power Supply	-48 V DC
Operating Temperature	-25°C to +55°C
Storage Temperature	-40°C to 70°C
Switching Capacity	128 Gbps
Ports	GPON, XG-PON, 10GE