xii • About this manual 8018653 1.1
•The installation site has been prepared in accordance with the
instructions contained in the GMH 2000 Base Station Controller
Site Preparation Specifications.
•All equipment to be installed is available at the installation site.
•All special equipment, tools, and test equipment required for
installation and maintenance are available.
Conventions used in
this document
Notes, cautions, and warnings, defined as follows, are used throughout
this manual to help you become familiar with possible safety or
equipment hazards.
Note
Presents additional information or interesting
sidelights.
Caution
Indicates a procedure that may result in equipment
damage if not strictly observed.
WARNING
Indicates a procedure that may result in personal
injury if not strictly observed.
Version record
Version Date Description
1.0 09/24/93 Document released.
1.1 04/11/94 Editing changes made throughout
document along with some
nomenclature changes.
To Next Page
Loading...
Need help?
General