8018653 1.1 Troubleshooting • 4-1
Chapter 4
Troubleshooting
Troubleshooting procedures and tests in this section will help isolate a
problem to a specific source for correction. Once you have determined
the cause of the malfunction, refer to chapter 5, “Maintenance” for the
appropriate repair or replacement procedure.
4.1
Fault analysis procedure
The following procedures outline steps you should follow when
troubleshooting a BSC system malfunction.
1. If possible, speak with the person who filed the trouble
complaint and determine the operational symptoms.
2. Record the symptoms on a malfunction report such as the one
shown in figure 4-1.
3. Refer to section 4.2, “Troubleshooting flowcharts”
To Next Page
Loading...